Performance features

The STANDARD, STANDARD S, EVOLUTION, CONTROL and STRIEBIG 4D models have a powerful 5.5 kW (7.5 hp) motor. The COMPACT model has a 3.9 kW (5.3 hp) motor.

In the basic equipment of the STRIEBIG saws, the saw blade speed is fixed at 4800 rpm (50 Hz) and a cutting speed of 75 m/sec (50 Hz). Optionally, a motor with two speeds can be ordered in the machine configuration for the STANDARD S, EVOLUTION, CONTROL and STRIEBIG 4D models. This makes it possible to optimise cutting of e.g. dust-intensive or abrasive materials (gypsum, Duripanel, Fermacell, Norit or Sasmox boards, etc.) with half the saw blade speed (2400 rpm, 50 Hz) and a cutting speed of 38 m/sec (50 Hz). For the CONTROL and STRIEBIG 4D models, a frequency-controlled motor with infinitely variable speed from 900 to 5000 rpm can also be ordered as an option and installed at the factory.

The EVOLUTION, CONTROL and STRIEBIG 4D models have a pneumatic connection as standard and must be connected to a compressed air network or compressed air generator by the customer. With the STANDARD S model, compressed air is required when the comfort package is ordered with the machine.

For the COMPACT model, the maximum cutting depth is 60 mm. For the STANDARD, STANDARD S, EVOLUTION, CONTROL and STRIEBIG 4D models, the standard cutting depth is 80 mm. Optionally, the CONTROL can be ordered ex works with a cutting depth of 103 mm. The STRIEBIG 4D sawing centre offers even more cutting depth with the optional cutting depths 105 mm or 130 mm. The special cutting depth must be installed at the factory.

It is not possible to separate the saw frame horizontally or vertically at a later date. With the exception of the COMPACT model, all machines can be ordered with horizontally separated saw frame.

Yes, for the EVOLUTION, CONTROL and STRIEBIG 4D models, a spray device can be installed ex works for processing aluminium panels. We recommend the use of a spray device for cutting aluminium panels from 20 mm thick. The service life of the tools can be increased considerably with this cooling and lubrication system. The workpiece remains dry and has a visibly improved surface quality.