Cutting angles

The WSG angle cutting device is a special accessory for STRIEBIG panel saws, which allows precise angle cutting of various materials. It is mounted on the support rollers of the STRIEBIG panel saw and allows the adjustment of different angles for exact angle cuts. Especially in furniture making, joinery and interior design, the STRIEBIG angle cutting device is a useful extension as it increases the variety of cuts and designs and increases the flexibility of the vertical panel saw.

Angle cutting with the angle cutting device accessory on a STRIEBIG vertical panel saw offers several advantages that benefit you on multiple levels. Users can make precise angle cuts in wooden panels and achieve precise angles for frames, joints and other constructions. This saves time as the panels do not have to be manually processed or transported to another machine.

The vertical panel saw allows precise and repeatable cuts through the use of fences, scales and other adjustments.

The versatility of the STRIEBIG machine opens up various application options and enables the realisation of complex shapes and designs. In addition, the stable panel holder ensures clean and precise cuts with good surface quality. However, it is important to read the instruction manual of your STRIEBIG saw carefully and to follow the correct settings and safety measures in order to achieve optimal results when cutting and to avoid accidents.

Das Winkel Sägen mit dem Zubehör Winkelschnittgerät auf einer vertikalen STRIEBIG Plattensäge bietet verschiedene Vorteile, von denen Sie auf mehreren Ebenen profitieren. Benutzer können präzise Winkelschnitte in Holzplatten durchführen und exakte Winkel für Rahmen, Verbindungen und andere Konstruktionen erzielen. Dies spart Zeit, da die Platten nicht manuell bearbeitet oder zu einer anderen Maschine transportiert werden müssen.
 

Correct alignment and clamping of the workpiece is crucial for precise and safe cuts with your vertical panel saw. As a first step, check the workpiece for cleanliness and remove any obstructions. Place the workpiece so that the area to be cut is freely accessible and there are no obstructions.

Clamp the workpiece in the vice locks of the angle cutting device to prevent it from moving out of position during cutting and set the cutting angle using the scale. Always observe the safety measures and wear personal protective equipment.

By following these steps, you will achieve precise cuts and minimise the risk of injury. In addition, we recommend that you read the operating instructions for your STRIEBIG panel saw for specific instructions on aligning and clamping the workpiece.

To set the cutting angle on a vertical panel saw such as the STRIEBIG panel saw, you should follow some basic steps. First, check the scale or angle stop to make sure they are accurate and easy to read. Release the angle stop so it can move freely and set it to the required angle.

Make sure the angle stop is locked to remain stable during cutting and check the setting again before the actual cutting.
Read the instruction manual of your panel saw as the exact procedure may vary depending on the model. The accuracy of the angle setting is crucial to achieving precise results.

Start by taking the necessary safety measures and wearing your personal protective equipment, such as safety goggles and hearing protection. Then make sure that the machine is working properly and that all safety devices are intact. Make sure that the workpiece is correctly aligned and securely clamped. Make the correct adjustments to the panel saw and ensure that your hands are at a safe distance from the saw blade.
Dip the saw unit and guide it over the workpiece to finish the sawing process.

After cutting the angle, check the cut workpiece for quality and take further processing steps if necessary. During the entire process it is of utmost importance to follow the instructions in the instruction manual of your specific panel saw.

Take sufficient time to carry out the cut carefully and precisely and ensure that you always have full control of the workpiece and the machine.